Skip to product information
Workhorse Injectable Packing For Most Temperature Ranges
Tiger Pak Blue
$73.50
The original Tiger Pak Product developed by the Jim Ray Company decades ago, Tiger Pak Blue has been a workhorse in the oil and gas industry. The blocking agents will extend the life of a valve especially in the event of a scratched stem or packing ring. Its high TFE and anti-extrusion fiber compound does not degrade in storage or normal use. Sealing up to 30,000 PSI at a range of -85 F to 600 F with top off injections, it can handle the vast majority of packing requirements.
Properties
Color |
Blue |
Type |
Plastic Bulk |
Corrosion |
None |
Moisture Content |
Nil |
Metal Adhesion |
Non-Coating |
Grades Available |
Stick, Strips |
Color |
Dark Green |
Recommended Uses
Crude Oil
Natural Gas
Steam
Additional benefits are
- It can be injected through a ball check fitting in the field to pack off or rejuvenate leaking stem packing glands.
- It can be furnished in selected strip sizes with a semi-solid TFE mixture applied on one side to impart and maintain low operating torques for gate valve stems.
- It has a unique characteristic of “lubricity with tack”. This feature allows high metal adhesion under extreme pressure while imparting low operating torques. Many other types of packing will tack to a valve stem so positively that they are removed from the gland during actuation, resulting in higher operating torques.
- It contains anti-extrusion fibers that effectively bridge damaged seal leak paths.
Jim Ray Product Comparison
- Better able to seal larger scratches and more damaged valves than Tiger Pak Wellhead
- Harder to inject than Tiger Pak Wellhead
- Better temperature range than Tiger Pak FF and Tiger Pak F
- Less resistant to solvents than Tiger Pak FF and Tiger Pak F