Skip to product information
Solvent Resistant Injectable Packing For Larger Cracks and Damaged Valves
Tiger Pak F
$86.00
Tiger Pak F is a great injectable packing for those valves that might have larger cracks and damaged valves. The blocking agents will extend the life of a valve especially in the event of a scratched stem or packing ring. Sealing up to 30,000 PSI at a range of -20 F to 450 F, it can handle the vast majority of packing requirements. Its solvent resistant high TFE and anti-extrusion fiber compound is a great choice for most hydrocarbon service, including those products that contain MTBE.
Properties
Type |
Plastic Bulk |
Corrosion |
None |
Moisture Content |
Nil |
Metal Adhesion |
Non-Coating |
Grades Available |
Stick, Strips |
Color |
Dark Green |
Recommended Uses
Crude oil, Natural Gas, Natural Gas Condensates and Liquids, Y-Grade, Refined Products including Gasoline and Diesel, and products that contain MTBE.
Additional Benefits
- It can be injected through a ball check fitting in the field to pack off or rejuvenate leaking stem packing glands.
- It can be furnished in selected strip sizes with a semi-solid TFE mixture applied on one side to impart and maintain low operating torques for gate valve stems.
- It contains anti-extrusion fibers that effectively bridge damaged seal leak paths.
Jim Ray Product Comparison
- Better able to seal larger scratches and more damaged valves than Tiger Pak “FF”
- Harder to inject than Tiger Pak “FF”
- More resistant to solvents than Tiger Pak Blue and Tiger Pak Wellhead
- Less temperature range than Tiger Pak Blue and Tiger Pak Wellhead